Start Video
0:00 | 0:00
0
0:00 | 0:00
player_close

LuerMate 60M Medical Luer Connection Tool

Sleeve-actuated grip-and-seal connector for quick repeatable connections to medical thread luers.

  • Seals against any full and partial threaded standard luers.
  • Instant external threaded connection with floating piston to ensure proper ID sealing position.
  • Cleaned and lubricated for oxygen safe environment with FDA approved seals.
  • SurConnect© - Green to go visible indicator to ensure complete connection.

Designed For: leak/burst testing, balloon pleating/folding, heart valve crimping, stent crimping, and other related processes.

Connects To:
Medical Luers
Max Pressure Rating:
10 mtorr (micron) to 750 psi (51.7 bar)
Actuation Method:
Sleeve
Actuation Type:
Luers

60M Datasheet: Click Here

60M Operating Instructions: Click Here

60M Main Seal Replacement: Click Here

60M Rebuild / Repair: Click Here

Product Video: Watch Here

Configure Your Product View Maintenance Parts

Similar Products

ME Medical External Sealing Connection Tool

Pneumatic seal-only connector for external sealing of medical and life science devices in automated and semi-automated processes.

LuerMate ML Full-Thread Luer Connection Tool

Pneumatic nested sealing tool for leak-tight connections to full-thread luers in automated and semi-automated processes.

LuerMate MLL Luer Seal-Only Connection Tool

Pneumatic seal-only connector for female luers in automated and semi-automated medical processes.

LuerMate MLH Full-Thread Luer Connection Tool

Pneumatic sealing connector for full-thread luers requiring quick repeatable medical connections.

The Manual LuerMate — Widest Luer Coverage, With a Green-to-Go Indicator

The FasTest LuerMate 60M is a sleeve-actuated external connector for medical thread luers, rated from 10 millitorr of vacuum up to 750 psi (51.7 bar). It seals against any full or partial threaded standard luer — the widest luer coverage in the LuerMate family — and it is the only member of that family actuated manually rather than pneumatically.

That single distinction defines it. The ML, MLH and MLL are pneumatic connectors designed to be built into automated and semi-automated production equipment. The 60M is the one an operator picks up and uses: sleeve actuated, instant, and equipped with the feedback a manual connection needs. It is the LuerMate for benchtop work, laboratory testing, low-volume production, and any situation where a person rather than a station is making the connection.

That is also why the SurConnect© indicator is on this model. In an automated cell, the equipment controls and confirms the connection. Working by hand, an operator has no such confirmation — so the 60M gives a green-to-go visible indicator that shows the connection is complete before the test begins. It converts a judgement call into something the operator can simply see.

A floating piston ensures the seal reaches its proper ID sealing position on every connection, which matters because luer geometry varies between full and partial threaded types and between manufacturers. As with the rest of the family, the 60M is cleaned and lubricated for oxygen safe environments and fitted with FDA approved seals.

The Problem the FasTest LuerMate 60M Solves

Making luer connections by hand, in a medical environment, raises problems that an automated connector never has to answer:

  • A manual connection has no built-in confirmation: In an automated cell the equipment verifies the connection. By hand, the operator is left judging whether the seal is fully made — and a marginal connection that looks fine produces a test result that cannot be trusted.

  • Luer geometry is not uniform: Devices arrive with full threaded and partial threaded luers from different manufacturers. A connector that handles only one type means either a second tool or parts that cannot be tested.

  • Seal position varies with the part: If the seal seats at a slightly different depth each time, sealing is inconsistent — which on a low-volume bench, where every part matters, is a direct source of retests.

  • Medical work constrains materials: Cleanliness for oxygen service and FDA approved seals are conditions of use in this field, not optional additions.

The FasTest LuerMate 60M answers each: a SurConnect© green-to-go indicator makes connection status visible, full and partial threaded luers are both covered, a floating piston sets the ID sealing position consistently, and the connector is prepared for oxygen safe environments with FDA approved seals.

Key Features 

Seals Against Any Full and Partial Threaded Standard Luer

The FasTest LuerMate 60M covers both full threaded and partial threaded standard luers — broader coverage than any other connector in the LuerMate family, where the ML and MLH address full thread luers and the MLL addresses female luer fittings. On a bench handling devices from multiple programmes or suppliers, that breadth means one connector rather than a set.

Instant External Threaded Connection With Floating Piston

The connection is made instantly against the outside of the luer, with a floating piston ensuring the seal reaches its proper ID sealing position. Because luer geometry varies between thread types and manufacturers, a fixed seal position would seat differently from part to part; the floating piston compensates, so the sealing geometry stays consistent across a mixed population of devices.

SurConnect© — Green-to-Go Visible Indicator

SurConnect© gives the operator a green-to-go visible indicator confirming the connection is complete. This is the feature that makes the 60M work as a manual tool: rather than relying on feel or on a retest to reveal a marginal connection, the operator sees that the connection is fully made before starting. On a low-volume bench where each part carries real value, catching an incomplete connection before the test rather than after is the difference between a clean result and a wasted cycle.

Cleaned for Oxygen Safe Environments, With FDA Approved Seals

The FasTest LuerMate 60M is cleaned and lubricated for oxygen safe environments and fitted with FDA approved seals, in common with the rest of the LuerMate family. Confirm the specific preparation and seal specifications for your application with FasTest.

Technical Specifications

SpecificationDetail
Product TypeExternal, sleeve-actuated (manual) connector for medical thread luers.
Connects ToMedical luers — seals against any full and partial threaded standard luer.
Max Pressure Rating10 mtorr (micron) to 750 psi (51.7 bar) — the highest in the LuerMate family.
Actuation MethodSleeve — manual. The only LuerMate that is not pneumatically actuated.
Actuation TypeLuers.
SealingInstant external threaded connection with floating piston to ensure proper ID sealing position.
Connection ConfirmationSurConnect© — green-to-go visible indicator confirming complete connection.
PreparationCleaned and lubricated for oxygen safe environment.
Seal MaterialFDA approved seals.
Designed ForLeak/burst testing, balloon pleating and folding, heart valve crimping, stent crimping, and other related processes.
LuerMate Family60M (manual sleeve, full and partial threaded luers, 750 psi) | ML (pneumatic/automated, full thread luers) | MLH (pneumatic, full thread luers, self-aligning) | MLL (pneumatic, female luers, seal-only, 100 psi).
Documentation60M datasheet, operating instructions, main seal replacement, and rebuild/repair instructions, plus a product video — the most complete documentation set in the LuerMate family.

Where the FasTest LuerMate 60M Is Used

Benchtop and Laboratory Leak Testing

Manual sleeve actuation and a green-to-go indicator make the 60M the natural LuerMate for benchtop and laboratory work, where connections are made by hand and there is no station to verify them. The operator sees the connection is complete before the test runs.

Mixed Luer-Type Testing

Because the FasTest LuerMate 60M seals against both full and partial threaded standard luers, a bench receiving devices from several programmes or suppliers can work from one connector. The floating piston keeps sealing consistent across that variation in geometry.

Higher-Pressure Burst and Proof Testing

At up to 750 psi (51.7 bar) the 60M carries the highest rating in the LuerMate family, which makes it the option where test pressure exceeds what the pneumatic models are rated for — including burst testing of devices designed for higher working pressures.

Balloon Pleating, Stent and Heart Valve Crimping

The 60M is also used in the same forming and crimping processes as the rest of the family — balloon pleating and folding, stent crimping, and heart valve crimping — where the device is held pressurised while it is physically worked on, and manual actuation suits development, prototyping, and lower-volume production.

FasTest LuerMate 60M vs. the Pneumatic LuerMates (ML, MLH, MLL)

 LuerMate 60MML / MLH / MLL
ActuationManual sleevePneumatic; ML and MLL also semi- and fully-automated
Built ForBenchtop, lab, low-volume, developmentAutomated and semi-automated production cells
Connection CheckSurConnect© green-to-go indicatorControlled and verified by the station
Luer CoverageFull AND partial threaded luersFull thread (ML, MLH); female luers (MLL)
Max Pressure750 psi (51.7 bar) — highest in familyLower; varies by model
Seal PositioningFloating pistonPurpose-shaped nests and self-aligning designs
Seals & PreparationFDA approved, oxygen safe prepFDA approved, oxygen safe prep
Choose WhenA person makes the connectionA machine makes the connection

Frequently Asked Questions

Q: What is the FasTest LuerMate 60M?

A: The FasTest LuerMate 60M is a sleeve-actuated external connector for medical thread luers, rated from 10 mtorr (micron) of vacuum to 750 psi (51.7 bar). It seals against any full or partial threaded standard luer and includes a SurConnect© green-to-go indicator confirming the connection is complete.

Q: What is SurConnect©?

A: SurConnect© is FasTest’s green-to-go visible indicator. It shows the operator that the connection is fully made before the test starts — which matters particularly on a manually actuated connector, where there is no equipment to verify the connection automatically.

Q: What luers does the LuerMate 60M connect to?

A: Any full or partial threaded standard medical luer. That is the widest luer coverage in the LuerMate family — the ML and MLH address full thread luers, and the MLL addresses female luer fittings.

Q: How is the LuerMate 60M actuated?

A: By manual sleeve. It is the only connector in the LuerMate family that is not pneumatically actuated, which makes it the one to specify when a person rather than a machine is making the connection.

Q: What does the floating piston do?

A: It ensures the seal reaches its proper ID sealing position on each connection. Because luer geometry varies between full and partial threaded types and between manufacturers, a fixed seal position would seat differently from part to part — the floating piston compensates so sealing stays consistent.

Q: What is the pressure rating of the LuerMate 60M?

A: 10 mtorr (micron) of vacuum up to 750 psi (51.7 bar) — the highest pressure rating in the LuerMate family.

Q: When should I choose the 60M over the ML, MLH, or MLL?

A: Choose the 60M when the connection is made by hand — benchtop testing, laboratory work, development and prototyping, or lower-volume production — and when you need coverage of both full and partial threaded luers or a pressure rating above the pneumatic models. Choose the ML, MLH or MLL when the connector is being built into automated or semi-automated equipment.

Q: Does the LuerMate 60M use FDA approved seals?

A: Yes, and it is cleaned and lubricated for oxygen safe environments. Contact FasTest to confirm the seal and preparation specifications for your application.

Q: What is the LuerMate 60M used for?

A: Leak and burst testing, balloon pleating and folding, stent crimping, and heart valve crimping — particularly in benchtop, laboratory, development, and lower-volume production settings where connections are made manually.

Q: What industries use the LuerMate 60M?

A: Medical device and life science manufacturing — catheter, stent, and heart valve production, along with device development and quality laboratories where luer-connected products are tested by hand.