Start Video
0:00 | 0:00
0
0:00 | 0:00
player_close

ZeroMax™ | MBV Evacuation Tool

Evacuation tool for efficient system evacuation through ZeroMax™ | access ports.

The NEW ZeroMax™ System eliminates the need for Process "Stub" Tubes or crimp type capping systems and their associated crimping & welding equipment. OEM's and Service Technicians now have an easy, repeatable system access for rework, service and end-of-life refrigerant recovery that doesn't leak. 

ZeroMax™ assures a hermetic, Zero-Leakage seal by incorporating FasTest's patent pending Access Port technology and Mazimizes Accessibility. 

ZeroMax™ MBV Evacuation Tool (CMPT20)

Ball latching connector with internal valve instantly seals vacuum when disconnected. Connect to Traveler at Evacuation station to evacuate system. 

  • Ergonomic ball & sleeve action
  • Safety Latch system will not disconnect under pressure
  • 1/4 NPT media port 

ZeroMax™ Brochure: Click Here

ZeroMax™ Evacuation Tool Operating Instructions: Click Here 

ZeroMax™ Evacuation Tool Rebuild Instructions: Click Here 

ZeroMax™ System Guide: Click Here 

Configure Your Product View Maintenance Parts

Similar Products

ZeroMax™ | Refrigerant Access Ports

Zero-leak refrigerant access port system that eliminates process stub tubes while maintaining hermetic sealing.

ZeroMax™ | MBE Leak Test Tool

Leak test tool for fast repeatable connections to ZeroMax™ | access ports in OEM processing.

ZeroMax™ | Traveler Tool

Installation and processing tool for consistent placement and access of ZeroMax™ | port components.

ZeroMax™ | RQD Charge Tool

Charge tool for fast refrigerant charging through ZeroMax™ | access ports.

The Evacuation Tool That Seals the Vacuum the Instant You Disconnect

The FasTest ZeroMax™ MBV Evacuation Tool (CMPT20) is the evacuation tool of the ZeroMax™ system — the tool that pulls the system down to vacuum through a ZeroMax™ access port. What sets it apart is what happens when you disconnect: its internal valve instantly seals the vacuum. The deep vacuum you just pulled is held, not lost as the tool comes off.

That matters because evacuation is the slow, valuable step. Degassing and dehydrating a system down to a deep vacuum takes time, and a tool that let the vacuum bleed back as it disconnected would waste that work at the last moment. The MBV’s internal valve closes instantly on disconnect, so the vacuum is preserved and the system holds the state you worked to reach. It is the evacuation-specific counterpart to the way each ZeroMax™ tool’s internal valve is tuned to its job — the MBV seals vacuum, the RQD charge tool controls refrigerant for recovery, the MBE leak test tool is valveless for maximum flow, and the Traveler holds the plug state.

It works with the Traveler at the evacuation station: connect to the Traveler and evacuate the system through the ZeroMax™ port. The connection is a ball latching connector with an ergonomic ball & sleeve action and a safety latch that will not disconnect under pressure, on a 1/4 NPT media port.

And it belongs to the ZeroMax™ system, which is the reason it exists in this form: ZeroMax™ replaces process “stub” tubes and crimp-type capping — and the crimping and welding equipment they need — with a hermetic, zero-leak access port. For OEMs and service technicians that means easy, repeatable access for rework, service, and end-of-life refrigerant recovery that doesn’t leak, and — because there is no hot work to cap a tube — a system suited to flammable (A2/A3) refrigerants.

The Problem the FasTest ZeroMax™ MBV Evacuation Tool Solves

Evacuating a system through a ZeroMax™ port raises problems the MBV is designed around:

  • Vacuum lost on disconnect wastes the work: Evacuation is slow and valuable. The internal valve instantly seals the vacuum when the tool disconnects, so the deep vacuum is preserved rather than bled back.

  • Stub tubes and crimp caps mean hot work: The conventional way to close a system after processing is a crimped or welded stub tube. ZeroMax™ replaces that with a hermetic port — no crimping or welding equipment, and no hot work, which matters for flammable refrigerants.

  • Access has to be repeatable and leak-free: Rework, service, and end-of-life recovery all need to re-access the system without leaking. The ZeroMax™ port gives repeatable, hermetic access; the MBV is the tool that evacuates through it.

  • Disconnecting under pressure is a hazard: A safety latch prevents the tool from disconnecting under pressure, so it comes off only when it should.

The FasTest ZeroMax™ MBV Evacuation Tool answers each: an internal valve that seals the vacuum on disconnect, hermetic access without stub tubes or hot work, repeatable leak-free connection, and a safety latch against disconnection under pressure.

Key Features 

Internal Valve — Instantly Seals the Vacuum on Disconnect

The defining feature: the tool’s internal valve closes the instant it disconnects, sealing the vacuum in the system. The deep vacuum reached during evacuation is preserved as the tool comes off, so the work of degassing and dehydrating is not lost at the last step. This is what makes the MBV an evacuation tool rather than just a connector.

Works With the Traveler at the Evacuation Station

At the evacuation station, the MBV connects to the Traveler to evacuate the system through the ZeroMax™ port. The Traveler carries and places the port’s plug and travels with the unit; the MBV is the tool that pulls the vacuum at that station.

Ball Latching With a Safety Latch

A ball latching connector with an ergonomic ball & sleeve action makes the connection quick and repeatable, and a safety latch system prevents disconnection under pressure — so the tool releases only when it is safe to.

1/4 NPT Media Port

The MBV uses a 1/4 NPT media port, the ZeroMax™ tool interface — the port through which the system is evacuated.

Part of the Hermetic, Zero-Leak ZeroMax™ System

The MBV is one tool in the ZeroMax™ set — alongside the MBE leak test tool, the RQD charge tool, and the Traveler — that work with the ZeroMax™ access port. Because ZeroMax™ replaces crimped/welded stub tubes with a hermetic port, the whole system supports rework, service, and end-of-life recovery without hot work, which suits it to flammable refrigerants.

Technical Specifications

SpecificationDetail
Product TypeEvacuation tool for the ZeroMax™ hermetic access port system.
Part NumberCMPT20.
Signature FeatureInternal valve instantly seals the vacuum when disconnected.
ConnectionBall latching connector; ergonomic ball & sleeve action.
Media Port1/4 NPT.
SafetySafety latch system — will not disconnect under pressure.
Works WithTraveler, at the evacuation station, to evacuate through the ZeroMax™ port.
System RoleOne of the ZeroMax™ tools — alongside the MBE Leak Test Tool, RQD Charge Tool, and Traveler Tool — all working with ZeroMax™ Refrigerant Access Ports.
DocumentationZeroMax™ brochure, Evacuation Tool operating instructions, Evacuation Tool rebuild instructions, and the ZeroMax™ System Guide.

Where the FasTest ZeroMax™ MBV Evacuation Tool Is Used

OEM Evacuation of ZeroMax™-Equipped Systems

Its core use is the evacuation station on a production line: connect through the ZeroMax™ port, pull the system down to vacuum, and disconnect with the vacuum sealed in. Degassing and dehydration are preserved by the internal valve on disconnect.

Flammable (A2/A3) Refrigerant Systems

Because ZeroMax™ replaces crimped or welded stub tubes with a hermetic port — no hot work to close the system — it suits systems using flammable A2/A3 refrigerants, where the MBV evacuates without the ignition risk of welding or crimping a charged tube.

Rework, Service, and End-of-Life Recovery

The ZeroMax™ port gives repeatable, leak-free re-access, so the MBV supports evacuation not just in first-time production but in rework, service, and end-of-life refrigerant recovery.

HVAC-R Manufacturing and Service

Its home is HVAC-R — air conditioning, refrigeration, and heat pump systems — wherever a ZeroMax™ hermetic access port is used and the system needs to be evacuated.

ZeroMax™ MBV Evacuation vs. Conventional Stub-Tube Evacuation-and-Capping

 Stub Tube + Crimp / Weld CapZeroMax™ MBV Evacuation
Vacuum on DisconnectRisk of loss before cappingInternal valve seals it instantly
Closing the SystemCrimp / weld the stub tubeHermetic port — no hot work
Flammable RefrigerantsHot work is a hazardNo hot work — suited to A2/A3
Re-AccessCut / re-process the tubeRepeatable, leak-free port access
EquipmentCrimping & welding gearZeroMax™ tool + port
ConnectionManualBall latching, safety latch

Frequently Asked Questions

Q: What is the ZeroMax MBV Evacuation Tool?

A: It is the evacuation tool of the FasTest ZeroMax™ system, part number CMPT20. It evacuates a system through a ZeroMax™ hermetic access port, and its internal valve instantly seals the vacuum when it disconnects, so the deep vacuum is preserved. It connects to the Traveler at the evacuation station.

Q: What does “internal valve instantly seals vacuum” mean?

A: When the tool disconnects from the port, an internal valve closes immediately and seals the vacuum in the system. Instead of the vacuum bleeding back as the tool comes off, the system holds the deep vacuum you pulled — preserving the slow, valuable work of degassing and dehydration.

Q: Does it work with the Traveler?

A: Yes. At the evacuation station the MBV connects to the Traveler to evacuate the system through the ZeroMax™ port. The Traveler carries and places the port’s plug; the MBV pulls the vacuum.

Q: How is ZeroMax different from a stub tube?

A: ZeroMax™ replaces process “stub” tubes and crimp-type capping — and the crimping and welding equipment they require — with a hermetic, zero-leak access port. It gives OEMs and service technicians easy, repeatable, leak-free access for rework, service, and end-of-life recovery.

Q: Is it suitable for flammable refrigerants?

A: ZeroMax™ closes the system with a hermetic port rather than by crimping or welding a stub tube, so there is no hot work — which suits it to flammable A2/A3 refrigerants, where an ignition source near the refrigerant is a hazard. Follow the ZeroMax™ operating instructions and applicable refrigerant-handling standards.

Q: How do the ZeroMax tools differ from each other?

A: Each has an internal design tuned to its job. The MBV Evacuation Tool (CMPT20) seals the vacuum on disconnect; the RQD Charge Tool (CMPT30) controls refrigerant for charging and recovery; the MBE Leak Test Tool (CMPT10) is valveless for maximum flow during leak testing; and the Traveler Tool (CMPT40) carries and torques the port’s plug. All work with the ZeroMax™ access port.

Q: What is the part number?

A: CMPT20. Distributors and repeat buyers can search that part number directly for the ZeroMax™ MBV Evacuation Tool.

Q: Can it disconnect under pressure?

A: No. The safety latch system prevents disconnection while the system is under pressure, so the tool releases only when it is safe to.

Q: What is the pressure and vacuum rating?

A: The live page does not currently state a pressure/vacuum rating for this tool — the specification block is missing. Confirm the rating with FasTest or in the ZeroMax™ System Guide.

Q: What industries use the ZeroMax MBV Evacuation Tool?

A: HVAC-R — air conditioning, refrigeration, and heat pump manufacturing and service — particularly systems using ZeroMax™ hermetic access ports and flammable A2/A3 refrigerants.