Start Video
0:00 | 0:00
0
0:00 | 0:00
player_close

PortMax™ | Service Tool

Field service tool for fast connection to PortMax™ | access ports during maintenance and recovery.

The NEW PortMax™ access port system is specifically designed to reduce processing time, in particular, evacuation time (degass/dehydrate) of large volume refrigerant systems currently processing through packed angle or ball valves. 

Service Tool (CMFT90)

Use to recover refrigerant, perform leak test, evacuate or charge refrigerant. Also use to replace Plug while system is under pressure. Torque Plug to seal system. 

  • Ball latching connector with an internal ball valve
  • Ergonomic ball & sleeve action. Safety Latch system will not disconnect under pressure
  • 1/2 NPT media port 
Connects To:
PortMax Access Port
Max Pressure Rating:
20 Micron to 2031psi (140bar)
Actuation Type:
OEM

PortMax™ Brochure: Click Here

PortMax™ Service Tool Operating Instructions: Click Here

PortMax™ Service Tool Rebuild/Seal Replace Instructions: Click Here

PortMax™ System Guide: Click Here

Configure Your Product View Maintenance Parts

Similar Products

PortMax™ | Refrigerant Access Ports

Large-capacity refrigerant access port system designed to reduce evacuation time and maximize processing flow.

PortMax™ | Leak Test Tool

High-flow tool for fast repeatable leak testing through PortMax™ | access ports.

PortMax™ | Evacuation Tool

High-flow evacuation tool for faster degassing and dehydration through PortMax™ | access ports.

PortMax™ | Charge Tool

High-flow charging tool for efficient refrigerant charging through PortMax™ | access ports.

One Tool for the Whole Service Call — Including Replacing the Plug Under Pressure

The FasTest PortMax™ Service Tool (CMFT90) is the field-service tool of the PortMax™ system, and it is the all-in-one of the family. On the production line, PortMax™ splits processing across four tools — evacuate, charge, leak test, and install the Plug. In the field, a technician cannot carry four tools to every call, so the Service Tool does all of it: recover refrigerant, perform a leak test, evacuate, charge, and torque the Plug to seal — through one fast connection to the PortMax™ access port.

It adds a capability the process tools do not have: it can replace the Plug while the system is under pressure. That matters in the field because the Plug is the seal at the heart of the port, and replacing it conventionally would mean recovering the entire refrigerant charge first, then recharging afterward. Being able to swap the Plug with the system still pressurised saves recovering and replacing the whole charge for what is otherwise a small job — saving refrigerant, time, and a great deal of work. (Because it is a procedure performed on a pressurised system, follow the Service Tool operating instructions for the method.)

This is also the one tool in the PortMax™ set built with an internal ball valve. The three process tools deliberately have no internal valve, because on the line maximum flow is what matters. The Service Tool trades some of that for control: an internal ball valve gives the technician the ability to open, close, and isolate flow — which is exactly what multi-function field work, and replacing the Plug under pressure, require. It still uses the large 1/2 NPT port and the ball latching connection of the rest of the family.

A safety latch system prevents the tool from being disconnected while the system is under pressure, and the tool spans 20 micron of vacuum to 2031 psi (140 bar) — covering the full range of field tasks from deep-vacuum evacuation to high-pressure work on the same connection.

The Problem the FasTest PortMax™ Service Tool Solves

Servicing a large refrigerant system in the field raises problems a single-function tool or a packed valve does not solve well:

  • A technician can’t carry the whole line: Recovery, leak test, evacuation, charging, and sealing are separate tools on the production line. In the field they need to be one tool — which is what the Service Tool is.

  • Replacing the Plug shouldn’t mean dumping the charge: Swapping the port’s Plug conventionally would mean recovering and recharging the whole system. The Service Tool replaces the Plug while the system is under pressure, so a small job stays a small job.

  • Field work needs flow control: Unlike a production process, field service needs to open, close, and isolate flow — so this tool has an internal ball valve, where the process tools have none.

  • Recovery has to be possible: Refrigerant must be recovered, not vented, during service. The tool is built to recover refrigerant through the PortMax™ port as part of the same connection.

The FasTest PortMax™ Service Tool answers each: one tool that recovers, tests, evacuates, charges, and seals; an internal ball valve for control; and the ability to replace the Plug under pressure without recovering the whole system.

Key Features 

All-in-One: Recover, Leak Test, Evacuate, Charge, Seal

The Service Tool performs, through one connection, the functions the production line splits across its evacuation, charge, and leak test tools — plus refrigerant recovery. For a field technician, that is the difference between one tool on the truck and several. It recovers refrigerant, leak tests, evacuates, charges, and torques the Plug to seal the system when the work is done.

Replaces the Plug While the System Is Under Pressure

Uniquely in the PortMax™ set, the Service Tool can replace the Plug — the port’s seal element — with the system still under pressure. Conventionally, changing the Plug would require recovering the full charge and recharging afterward; doing it under pressure avoids that entirely, saving refrigerant and time on what is otherwise a minor repair. As this is a procedure on a pressurised system, the Service Tool operating instructions give the method to follow.

Internal Ball Valve — Control for Field Work

The Service Tool is the one tool in the family with an internal ball valve. The three process tools have none, because on the line maximum flow matters most; field service instead needs to open, close, and isolate flow, which the ball valve provides. It is the design trade that suits the tool to its job — control over pure conductance.

Torques the Plug to Seal, With a Safety Latch

Like the evacuation and charge tools, the Service Tool torques the Plug into the port to seal the system, and a safety latch system prevents disconnection while the system is under pressure — essential for a tool that works across recovery, charging, and plug replacement, all under pressure. (The required plug torque value should be shown on the page; see the note at the end.)

Fast Ball Latching Connection, Large 1/2 NPT Port

A ball latching connector with an ergonomic ball & sleeve action makes a fast connection in the field, and the large 1/2 NPT media port keeps recovery, evacuation, and charging efficient — the same large port the rest of the PortMax™ tools use.

Technical Specifications

SpecificationDetail
Product TypeAll-in-one field service tool for PortMax™ access ports — recover, leak test, evacuate, charge, replace Plug under pressure, and seal.
Part NumberCMFT90.
Connects ToPortMax™ access port.
FunctionsRecover refrigerant; perform leak test; evacuate; charge; replace Plug while system is under pressure; torque Plug to seal.
ValveInternal ball valve (for flow control — unlike the valveless process tools).
Pressure / Vacuum Range20 micron of vacuum to 2031 psi (140 bar).
Media Port1/2 NPT.
SealingTorques the Plug into the port to seal the system.
Plug Torque ValuePlug: 12-14 ft-lbs (16-19 N-m) | Dust Cap: 12-14 ft-lbs (16-19 N-m) Do not exceed 14 ft-lb (19 N-m) when tightening Plug. Apply counter-torque to Access Port Seat hex when tightening Plug and Dust Cap to prevent imparting stress to brazed joints.
ConnectionBall latching connector; ergonomic ball & sleeve action.
SafetySafety latch system — will not disconnect under pressure.
Actuation TypeOEM.
System RoleThe field-service tool of the PortMax™ set — alongside the Evacuation, Charge, and Leak Test tools — all working with PortMax™ Refrigerant Access Ports.
DocumentationPortMax™ brochure, Service Tool operating instructions, rebuild/seal replacement instructions, and the PortMax™ System Guide.

Where the FasTest PortMax™ Service Tool Is Used

Field Service and Maintenance

Its core use is field service on PortMax™-equipped systems: a technician makes one fast connection to the port and can recover, test, evacuate, charge, and seal — the whole service call through a single tool rather than a kit of separate connectors.

Refrigerant Recovery

Recovering refrigerant — removing it from the system into a recovery unit rather than venting it — is a required part of service, and the Service Tool is built to do it through the PortMax™ port. (Recovered refrigerant is later reclaimed to specification at a reclamation facility; the tool performs the recovery step at the system.)

Plug Replacement Under Pressure

Where a port’s Plug needs replacing, the Service Tool does it with the system still pressurised — avoiding a full recover-and-recharge for a small repair. It is the capability that most sets this tool apart in the field.

HVAC-R and Large-System Service

PortMax™ serves larger HVAC-R and refrigerant systems — commercial and industrial air conditioning, refrigeration, and heat pumps — where the Service Tool supports maintenance and recovery in the field on the same ports used in production.

FasTest PortMax™ Service Tool vs. Conventional Field Service

 Conventional (Packed Angle / Ball Valve)PortMax™ Service Tool
FunctionsSplit across steps / toolsAll-in-one: recover, test, evac, charge, seal
Replace the Seal/PlugRecover full charge firstReplace Plug under pressure
Flow ControlDepends on the valveInternal ball valve
ConnectionThread / variesFast ball latching
RecoverySeparate setupThrough the same connection
Under PressureMay releaseSafety latch — will not disconnect
Pressure / VacuumVaries20 micron to 2031 psi (140 bar)

Frequently Asked Questions

Q: What is the PortMax Service Tool?

A: It is the field-service tool of the FasTest PortMax™ system, part number CMFT90 — an all-in-one tool that recovers refrigerant, leak tests, evacuates, charges, replaces the Plug while the system is under pressure, and torques the Plug to seal, all through one connection to a PortMax™ access port.

Q: What makes it “all-in-one”?

A: On the production line, PortMax™ uses separate tools to evacuate, charge, leak test, and install the Plug. The Service Tool performs all of those functions — plus refrigerant recovery — through a single connection, so a field technician carries one tool instead of several.

Q: Can it really replace the Plug while the system is under pressure?

A: Yes. The Service Tool can replace the Plug — the port’s seal element — with the system still under pressure, which avoids recovering the entire refrigerant charge and recharging just to make that change. Because it is a procedure on a pressurised system, follow the Service Tool operating instructions for the method.

Q: Does the Service Tool recover refrigerant?

A: Yes. It recovers refrigerant — removing it from the system into a recovery unit rather than venting it — through the PortMax™ port. That is the recovery step at the system; recovered refrigerant is later reclaimed to specification at a reclamation facility.

Q: Does it seal the system?

A: Yes. Like the evacuation and charge tools, it torques the Plug into the port to seal the system.

Q: Why does the Service Tool have an internal ball valve when the other tools don’t?

A: Because field service needs flow control, not just maximum flow. The three process tools are valveless so nothing restricts flow on the line. The Service Tool adds an internal ball valve so the technician can open, close, and isolate flow — which multi-function service, and replacing the Plug under pressure, require.

Q: What is the pressure and vacuum range?

A: 20 micron of vacuum to 2031 psi (140 bar).

Q: What is the part number?

A: CMFT90. Distributors and technicians can search that part number directly for the PortMax™ Service Tool.

Q: How does the Service Tool relate to the other PortMax tools?

A: The Evacuation, Charge, and Leak Test tools are single-function production tools, each valveless for high flow. The Service Tool is the field tool that does all of their jobs plus recovery and plug replacement under pressure, and it has an internal ball valve for control. Use the process tools on the line and the Service Tool in the field.

Q: What industries use the PortMax Service Tool?

A: HVAC-R and refrigerant systems — particularly larger commercial and industrial air conditioning, refrigeration, and heat pump systems — for field maintenance and recovery on PortMax™-equipped equipment.